The Orifice controls the amount of oil flow that is delivered to the head to lubricate the parts in the cylinder head and to cool down the engine assembly. However the stock oil-gallery orifice has a hole that is too large which allows too much oil to be delivered to the cylinder head which will cause the problems as listed below.
(1) Too much blow-by Gas,
(2) Blowing engine oil,
(3) Leaking oil through the valve guides,
(4) Insufficient oil delivery to the crank journal,
(5) Allows air pockets into the system from when the oil pan is under horizontal G-Forces.
The TOMEI oil gallery orifice was designed from the experience and data we had obtained from the development of our N1 endurance and drag racing engines. By restricting the diameter of the orifice to φ1.5mm (Normal is φ2.0mm) we succeeded in securing enough lubrication to the camshaft and valve while maintaining the correct amount of oil in the oil pan which resolved the common problems. (For added Blow by prevention, we recommend using the TOMEI 3D Profile pistons.)
Brand
TOMEI
You must be logged in to post a review.
Related products
-
TOMEI OIL SLICING BUFFLE SET EVO 8-9 193049
AED 1,050.00 inc. VATAdd to cartOil Slicing Baffle for Evo 8/9 Oil Pans Keeping track of proper oil function inside an engine assembly is vital, especially during high performance driving. This product in essence serves the same purpose as the standard 4G63 baffle except that it has been redesigned for increased efficiency, preventing catastrophic problems such as oil pressure drop. …
-
-
TOMEI BUFFLE STIFFNER FOR SUBARO 193036
AED 1,365.00 inc. VATAdd to cartOil Pan Baffle Plate Stiffner EJ20#/EJ25# (Previous Part Number 193036) One of the main causes of engine problems on an EJ20 are the bearings. The majority of the causes of these issues are due to the lack of motor oil in the oil pan (sump) and passages. Also, the lack of rigidity in the crank …
-
Reviews
There are no reviews yet.